Products
Synopsis.- Aluminium.
- Copper.
- Stainless steel.
- Nickel.
- Rolliner.
- Rolliner NG.
- Software.
- Accessories.
- Residual analyzer.
- Dew point recorder.
- Adapter for spools.
- Accessories for bulk packs.
- Packaging.
Accessories for bulk packs
Bulk packs (drums) for welding wires have one signifcant advantage - considerable savings in labour cost due to less frequent spool changes. 19 spool changes may be saved compared to the 7 kg spool by using our 
Jumbo-pack. Given a required labour time of 15 minutes per spool change this adds up to a saving of 4.75 hours. With a labour cost of Euro 50,-/hour a saving of Euro 237.50 is the pleasant result. Savings of up to several thousands of Euro per year are possible without much effort.
The use of bulk packs has two considerable consequences:
- Drums require appropriate handling and must not be damaged during transport
- A longer distance from the drum to the wire-feeder is needed in most cases. A wire feed hose will be required.
These items must be taken under consideration from the beginning, otherwise a succesful use of bulk packs may not be possible.
Decoiling cones - a clean solution
Providing protection against dust and anquor point for the wire feed hose we supply suitable decoiling cones.
- Decoiling cone - Jumbo pack
- Decoiling cone - ECO drum
Decoiling assistant - for special cases
- Pulley wheel
Pulley wheel for alloys of the 5000 series
The hard alloys of the 5000 series may lead to knotting in some cases. This will be prevented by our pulley wheel.
Wire feeding the shorter the better
is our recommendation. But this may not be possible in some cases.
The perfect solution will be our Rolliner of course. It alloys wire feed distances of 25 m and more.
If distances of few meters need to be bridged with little bendings, or push-pull drives are available, then the blueliner may be an alternative.
Blueliner
Blueliner is a special polymer conduit with a molecular adjustment for low friction with high strength at the same time. It is suitable for non-ferrous metals with wire diameters of 0.6 - 1.6 mm. The inner diameter is 7.6 mm and the outer diameter is 11.7 mm.
Blueliner with bayonet connectors
The blueliner may be equipped with useful bayonet connectors.
Direct pull kit for decoiling cones
The direct pull kit connects the blueliner to the decoiling cone.
Connectors for the wire feeder
These inlet guides provide a perfect connection the the wire feeders of different manufacturers.
Wire presence switch
For recognition of the wire end we supply a non-contacting sensor switch. Alternatively a normally close or a normally open switch is available. The operating voltage is 24 V.
Drum transport - on ground or in the air
Heavy duty drum dolly for the ECO drum
Suitable for bulk packs with a diameter of up to 520 mm and a maximum load of 453 kg.
Pallet skid dolly for the Jumbo pack
Suitable for square bulk packs up to a width of 690 mm and a maximum load of 453 kg.
Heavy duty drum staging cart for ECO drums
Designed for one person to transport up to 453 kg wire drums.
Drum shark drum lifter for ECO drums
Lifts ECO drums. The locking jaws firmly "bite" the drum without causing damage. The maximum weight is 453 kg.
ISO drum lifter for the Jumbo pack
This drum lifter is designed for our Jumbo pack and lifts maximum loads of 453 kg.
Fork lift adapter
This adapter allows transportation of our drums by fork lifts and in connection with our drum lifters.