Products
Synopsis.- Aluminium.
- Copper.
- Stainless steel.
- Nickel.
- Rolliner.
- Rolliner NG.
- Software.
- Accessories.
- Packaging.
- Aluminium- and Copper alloys.
- Stainless steels.
- Nickel alloys.
Spools and drums - the perfect packaging for each application
Spools
- Plastic spool S 100
- Plastic spool S 200
- Plastic spool S 300
- Basket spool B 300
- Basket spool BS 300
- Basket spool B 300 (3 kg)
- Basket spool B 400 18 kg
- Basket spool B 400 40 kg
Eco-Drum – your key to an ecological package
- ECO drum
Our Eco-Drum is a new type of packaging designed for all users of mechanized and robotic welding applications. With the exception of pure Aluminium (Al99,7 Al99,5Ti) all alloys from our Aluminium- and Copper consumables can be reeled off out of our Eco-Drum.
The Eco-Drum contains 80 kg of Aluminium wire or 200 kg of Copper wire. Of particular interest to bulk users is certainly CuSi3 1.0 mm which is used in a great scale for MIG-brazing. The Eco-Drum makes it possible to use a bulk supply without the otherwise necessary expensive and maintenance prone unwinding equipment. An integrated window provides visual wire end control.
The metal handles can be unscrewed and scraped after use. The remaining is nothing but paper and can be burned or disposed of as waste paper.
Dimensions: Diameter 500mm, Height 820mm
Jumbo - for real bulk users
- Jumbo-drum
The Jumbo drum is the bulk pack for all large consumers of aluminium welding wire. With the exception of pure Aluminium (Al99,7 Al99,5Ti) all alloys from our Aluminium- and Copper consumables can be reeled off out of our Eco-Drum.
Even wire diameters of 1.0 mm and alloys of the 5000 series can be decoiled without any problem. Due to the bigger diameter the wire comes nearly straight of the pack and is especially suitable for laser welding.
Jumbo is ecological as well and may be disposed of easily. In integrated control window enavles a visual wire end control.
Dimensions (LxWxH): 600 x 600 x 900 mm
- Recommended layout for a robotic cell
A trouble free use of drums needs much know-how and experience. Already the physical design of the welding system must be adapted to drums. An example of a robotic cell is shown here. We like to support you during the planning stage of your robotic system already - just 
ask us. A good example of the layout for a robotic welding system is shown in the picture. For greater distances from the drum to the wire feeder we recommend our Rolliner.
Suitable accessories for wire drums e.g. decoiling cones, wire end sensors, wire feed conduits and transport aids may be found here.
TIG-rods - for highest quality
- TIG rods Aluminium
- TIG rods Copper
Special packaging - for highest demands
Filler metals for welding are usually enclosed in a sealed plastic bag and then put into a box. The plastic bag protects the content against dust, however, only limited against humidity. It is hardly known that diffusion of humidity may occur even through airtight materials.
The equation shows that the quantity of the diffusing component depends on the material, the thickness and the difference in humidity inside and outside. Time is another important parameter.
At MIG WELD we use Polyethylene -low-pressure foils which have quite a low diffusion coefficient in comparison to i.e. PVC and get a sufficient At MIG WELD we use Polyethylene -low-pressure foils which have quite a low diffusion coefficient in comparison to i.e. PVC and get a sufficient humidity barrier for most of the applications. For extra-high requirements and/or very humid environments we can supply packaging with a multi-layer Aluminium foil, which gives highest resistance against humidity even at long periods of storage.
The vacuum pack makes it easy to confirm that the sealed bag is still tight.
| Material | Material Permeability for water vapour at 20°C in g/m2 in 24 hours, 0,1 mm folien thickness, difference of relative humidity 85 % |
| PVC | 6 - 12 |
| Polyethylene-low pressure foil | 0,1 - 0,2 |
| Multi-layer Aluminium foil | < 0,01 |
- B-300 vacuum packaging
- S-300 before welding
