5/19/2012 : 12:21 pm : +0200
Products
There are 10 visitors online.
| Typical composition in % |
|
| C |
≤ 0,10 |
| Si |
0,40 |
| Mn |
1,80 |
| P |
≤ 0,025 |
| S |
≤ 0,015 |
| Cr |
30,5 |
| Ni |
9,20 |
| Mo |
≤ 0,3 |
| Cu |
≤ 0,3 |
| Classification |
|
| EN 12072 G/W/P/S |
29 9 |
| DIN 8556 |
1.4337 |
| AWS ER |
312 |
| Base materials |
| Suitable for joining or cladding identical or similar steels or steel castings. Tough joints of un- and low alloyed structural steels with higher strength, as well as Manganese steels and CrNiMn steels, between different materials, i.e. between stainless or heatresistant and un/lowalloyed steels and steel castings. |
| Resistance against corrosion |
| Good resitsnace against wet corrosion up to 300° celsius. Additionally high resistance against hotcracking and good toughness at high yield strength. |
| Physical properties (Approx. values) at 20° C |
|
| Yield strength Rp0,2 [MPa] |
500 |
| Tensile strength Rm [MPa] |
750 |
| Elongation A [%] |
20 |
| Notched impact strengthV [J] |
25 |
| Shielding gas |
| MIG: Ar+1-3% O2, Ar+1-3% CO2, Ar+He+O2, Ar+He+CO2, Ar+He+CO2+H2 |
| WIG: Ar, He, Ar+He, Ar+2-5% H2 |
| Dimensions |
|
| MIG-wires [mm] |
0,8; 1,0; 1,2; 1,6 |
| TIG-rods [mm] |
1,0; 1,2; 1,6; 2,0; 2,4; 3,2; 4,0 |
Images of the packs may be found here...
| Spools |
| BS 300 / 15 kg |
| Drum / 300 kg |
TIG-rods are packed in boxes of 5 kg. The length is 1.000 mm.
Synopsis